FT232 module USB to serial port USB to TTL upgrade FT232BL
Detail Produk FT232 module USB to serial port USB to TTL upgrade FT232BL
DeskripsiĀ FT232 module USB to serial port USB to TTL upgrade FT232BL
MakassarRobotika merupakan Pusat Penjualan / Supplier Komponen Robotika Indonesia Timur yang berbasis di Makassar. Kami menyediakan komponen robotika atau mikrokontroller seperti arduino, sensor, modul, display, roda, motor gearbox, servo dll. Harga murah terjangkau dengan kualitas bersaing.
FT232 module USB to serial port USB to TTL upgrade FT232BL
Using FT232BL industrial chip, external EEPRON (93C46) more stable
Support Windows 10
Support 3 power supply modes: 5V external power supply; Three3V external power supply; external power supply (request 3.3V-5V)
Take 3 LED:TXD, LED, RXD, LED, POWER, LED
GND, RXD, TXD, 3V3, 5V: the bent pin out
Other functions PIN: reserved pads, CTS, RTS
With 500MA self recovery fuse, not connected to burn
Specification:
Material: PUC
Product detailed size: DuPont line length is about 18cm;; 24*70*10mm (chip size)
RS-232 traditional device upgraded to USB
USB to RS-232 serial adapter
Directions for use (to access MCU as an example)
GND: OK, GND
RXD: connect MCU.TX (signal flow: MCU.TX, FT232, PC.RX)
TXD: connect MCU.RX (signal flow direction: MCU.RX, FT232, PC.TX)
3V3/5V: output 3.3V or 5V (the module is powered by USB, jump the jumper cap to 3.3V or 5V)
RTS: connect MCU.CTS (signal flow direction: MCU.CTS, FT232, PC.RTS)
CTS: connect MCU.RTS (signal flow: MCU.RTS, FT232, PC.CTS)