Sensor warna TCS3200 Color Sensing Module Arduino
COLOR SENSOR MODULE TCS230 adalah module sensor yang dapat mendeteksi / mengenali warna, sangat cocok dihubungkann ke Arduino atau Minsys lainnya untuk project2 anda! Penjelasan resmi: Designed around 4 White LEDs and the TAOS TCS230 sensor IC. The four white LEDs to provide a broad spectrum light source. The TCS230 has an 8 x 8 array of photodiodes with color filters (16 Red, 16 Blue, 16 Green, 16 Clear). A light to frequency converter generates a 50% duty cycle square wave on the output pin. Frequency is directly proportional to light intensity. Output scaling 100%, 20% and 2% allows for wide dynamic range of intensities. toko The color selects (S2, S3), frequency scale (S0, S1) and output are TTL logic level and can be connected directly to the micro controller. duino Visit Tokoduino dot com Basic readings are easy using the Arduino pulsein command. Take a reading for each color. The reading with narrowest pulse width or highest frequency is the major color. Using advanced ratio analysis almost any color could be recognized. Spesifikasi: Sensor IC: TAOS TCS230 Power: 2.7 5VDC Current: >30mA @ 5V Input: TTL Logic Levels Visit Tokoduino dot com Sensor Bandwidth: ~400nm to 950nm Output: TTL Level Square Wave (50% Duty Cycle), ~2Hz max Dark / 24KHz Max Dual 4 Pin .1in Pitch Headers NOTE: The OE pin (Output Enable ) is grounded through R8 (0ohm), making the module enabled by default. Do not connect the OE to the micro controller, unless R8 is removed or changed to 4.7K or greater.
- Sisa Stok : 2
COLOR SENSOR MODULE TCS230 adalah module sensor yang dapat mendeteksi / mengenali warna, sangat cocok dihubungkann ke Arduino atau Minsys lainnya untuk project2 anda! Penjelasan resmi: Designed around 4 White LEDs and the TAOS TCS230 sensor IC. The four white LEDs to provide a broad spectrum light source. The TCS230 has an 8 x 8 array of photodiodes with color filters (16 Red, 16 Blue, 16 Green, 16 Clear). A light to frequency converter generates a 50% duty cycle square wave on the output pin. Frequency is directly proportional to light intensity. Output scaling 100%, 20% and 2% allows for wide dynamic range of intensities. toko The color selects (S2, S3), frequency scale (S0, S1) and output are TTL logic level and can be connected directly to the micro controller. duino Visit Tokoduino dot com Basic readings are easy using the Arduino pulsein command. Take a reading for each color. The reading with narrowest pulse width or highest frequency is the major color. Using advanced ratio analysis almost any color could be recognized. Spesifikasi: Sensor IC: TAOS TCS230 Power: 2.7 5VDC Current: >30mA @ 5V Input: TTL Logic Levels Visit Tokoduino dot com Sensor Bandwidth: ~400nm to 950nm Output: TTL Level Square Wave (50% Duty Cycle), ~2Hz max Dark / 24KHz Max Dual 4 Pin .1in Pitch Headers NOTE: The OE pin (Output Enable ) is grounded through R8 (0ohm), making the module enabled by default. Do not connect the OE to the micro controller, unless R8 is removed or changed to 4.7K or greater.
Sensor warna TCS3200 Color Sensing Module Arduino
| Berat | 15 Gram |
| Color | Black, Brown, Red, |
| Water Resistant | Yes |
| Material | Artificial Leather |
2 Review For Blue Dress For Woman
Alea Brooks March 5, 2018
Lorem Ipsumin gravida nibh vel velit auctor aliquet. Aenean sollicitudin, lorem quis bibendum auctor, nisi elit consequat ipsum, nec sagittis sem nibh id elit. Duis sed odio sit amet nibh vulputate
Grace Wong June 17, 2018
It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout. The point of using Lorem Ipsum is that it has a more-or-less normal distribution of letters